Installation guide

Brocade FastIron SX Series Chassis Hardware Installation Guide 57
53-1002500-01
Powering on the system
2
3. Use a Phillips-head screwdriver to remove the power lugs. Refer to Figure 4 and Figure 40.
4. Crimp #8 AWG input wire into the power lugs and reconnect the lugs to the power supply unit.
Refer to Figure 40.
FIGURE 39 Power supply wire
This equipment installation must meet NEC/CEC code requirements. Consult local authorities for
regulations.
FIGURE 40 Reconnect lugs to power supply.
1 #8 AWG power supply wire
1Ground
2DC power
1
+
–
1
2
Chassis
Rear View Detail