Installation guide

28 Brocade FastIron SX Series Chassis Hardware Installation Guide
53-1002500-01
Hardware features
1
The following power supplies can be installed in the FastIron X Series chassis devices:
• Non-PoE devices:
- The 12-volt AC and DC power supplies (also called system (SYS) power supplies) provide
power to one management module and up to eight non-PoE interface modules. In the FSX
800, you can install a second 12-volt power supply for redundancy. The FSX 1600 comes
with and requires two 12-volt power supplies and supports up to four 12-volt power
supplies for redundancy.
• PoE devices:
NOTE
FWS and FESX devices and SX-FI424P and SX-624P modules continue to support only PoE and
802.3af applications. All other FastIron PoE-compliant devices also support PoE+ and 802.3at
applications.
- The 12-volt AC and DC power supplies (also called system (SYS) power supplies) provide
power to the management module, all non-PoE interface modules (if applicable), and all
ports on PoE modules that do not require PoE power or to which no power-consuming
devices are attached. In the FSX 800, you can install a second 12-volt power supply for
redundancy. The FSX 1600 comes with and requires two 12-volt power supplies and
supports up to four 12-volt power supplies for redundancy.
- The 52- 54-volt PoE power supplies provide power to the PoE daughter card, and ultimately
to PoE power-consuming devices. The number of PoE power-consuming devices that one
52- 54-volt power supply can support depends on the number of watts required by each
power-consuming device. Each 52- 54-volt power supply can provide a maximum of 1080
SX-ACPWR-PoE 52-54 -volt AC
replacement power
supply, manufacturing
part number 32016-xxx
2
Supported
3
Supported
3
52- 54-volt AC original
power supply,
manufacturing part
number 30352-xxx
2
Supported
3
Supported
3
SX-DCPWR-SYS 52- 54-volt DC Supported Supported
SX-DCPWR-PoE 52- 54-volt DC Supported
3
Supported
3
SX-ACPWR2500-PoE 52- 54-volt AC
(220-volt input only)
Supported
3
Supported
3
1. For the differences between replacement and
original power supplies, refer to “Replacement
power supplies” on page 31.
2. Manufacturing part numbers are inscribed on the
labels on the top of the power supply.
3. FSX 800 and FSX 1600 devices automatically
perform a PoE power upgrade allowing 48-volt
power supplies to support a maximum 54-volts.
Refer to “Dynamic upgrade of PoE power
supplies” in the FastIron Configuration Guide.
TABLE 17 Power supplies supported for the FastIron X Series devices
Sales Model Number Description
1
FSX 800 FSX 1600