Network Router User Manual

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 801
53-1001931-01
Chapter
26Role Instance
In this chapter
•Role config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 801
Use the
(config-role) instance to configure Role related configuration commands. To navigate
to the
config-role instance, use the following commands:
RFController(config)#role <rolename> <rolepriority>
RFController(config-role)#
For more information on the role command, see role on page 278.
Role config commands
The following table summarizes config-role commands:
TABLE 28 Role Config Commands
Command Description mRef.
ap-location Sets the AP location configuration page 802
authentication
-type
Sets the authentication type configuration page 803
encryption-typ
e
Sets the encryption type page 804
essid Sets ESSID configuration for role based firewall page 805
group Sets role group properties page 806
ip Sets IP configuration properties page 807
mac Sets MAC configuration properties page 808
client-mac Sets Client MAC configuration properties page 809
no Negates role commands. page 811
service Invokes service commands to troubleshoot or debug
(config-dhcp) instance configurations
page 815
show Displays the running system information page 816
clrscr Clears the display screen page 810
exit Ends the current mode and moves to the previous mode page 813
end Ends the current mode and moves to the EXEC mode page 812
help Displays the interactive help system in HTML format page 814