Network Router User Manual

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 739
53-1001931-01
Chapter
23RFID Instance
In this chapter
•RFID config commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 739
The
(config-rtls-rfid) instance is used to configure RFID reader related configuration
parameters.
To navigate to this instance, use the commands
RFController(config)#rtls
RFController(config-rtls)#rfid
RFController(config-rtls-rfid)#
RFID config commands
Table 25 summarizes config-rtls-rfid commands:
TABLE 25 RFID Config Commands
Command Description Ref.
activate Activates/enables RFID reader configuration page 740
clrscr Clears the display screen page 741
end Ends the current mode and moves to EXEC mode page 742
exit Ends current mode and moves to the previous mode page 743
help Description of the interactive help system page 744
no Negates a command or set its defaults page 745
reader RFID Readers configuration commands page 746
service Invokes service commands to troubleshoot or debug
(config-rtls) instance configurations
page 748
show Displays the running system information page 751