Network Router User Manual

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 69
53-1001931-01
show
2
interfaces
Common to all modes
Displays the status of the different controller interfaces
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
show interfaces [WORD|ge|me1|sa|controllerport|vlan]
Parameters
Usage Guidelines
Use the show interface command to display the administrative and operational status of all the
interfaces or a specified interface
Example
RFController#show interfaces ge 3
Interface ge3
Hardware Type Ethernet, Interface Mode Layer 2, address is 00-a0-f8-65-ea-8e
index=2001, metric=1, mtu=1500, (HAL-IF) <UP,BROADCAST,MULTICAST>
Speed: Admin Auto, Operational Unknown, Maximum 1G
Duplex: Admin Auto, Operational Unknown
Active Medium: Unknown
Controllerport Settings: access, access-vlan: 1
Input packets 0, bytes 0, dropped 0,
Received 0 broadcasts, 0 multicasts
Input errors 0, runts 0, giants 0,
CRC 0, frame 0, fragment 0, jabber 0
Output packets 0, bytes 0, dropped 0
Sent 0 broadcasts, 0 multicasts
Output errors 0, collisions 0, late collisions 0,
excessive collisions 0
RFController#show interfaces wan
Interface wan
Hardware Type PPP, Interface Mode Layer 3
index=8, metric=1, mtu=1500, (PAL-IF) <UP,POINTOPOINT,RUNNING,NOARP,MULTICAST
>
inet 166.129.246.245/32 pointopoint 10.64.64.64
input packets 0, bytes 0, dropped 0, multicast packets 0
show interfaces
[WORD|ge|me1|sa|
controllerport|vlan]
Displays the interface name
• WORD– Displays interface name
• ge – Displays Gigabit Ethernet interface information
• me1 – Displays fast ethernet information
• sa – Displays Static Aggregate information
• controllerport – Displays native VLAN(s) and allowed VLAN
information on controller ports
• vlan[WORD|ge|me1| sa|vlan <1-4094> – Displays VLAN
interface details