Network Router User Manual

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 53
53-1001931-01
Common commands
2
• radio-desc – description of radio where the
wireless-client is associated
• radio-id – The radio index to which the
wireless-client is associated
• ssid – The ssid of the wireless-clients wlan
• state – The current state of the wireless-client
• username – The Radius username of the user
connected through this device (shown only if
applicable and available)
• vlan – The vlan-id assigned to the wireless-client
• wlan-desc – The wlan description the
wireless-client is using
• wlan-id – The wlan index the wireless-client is
using
• sh-wi-radio [adopt-info|ap-locn|ap-mac|
ap-name|bss|channel|dot11-type|num-client|power|
radio-desc|radio-id|state] – Customize the output of
the "show wireless radio" command
• adopt-info – The adoption information about the
radio
• ap-locn – The location of the AP to which this radio
belongs
• ap-mac – The MAC address of AP to which the
radio belongs
• ap-name – The name of the AP to which this radio
belongs
• bss – The bssid of the radio
• channel –The configured and current channel of
the radio
• dot11-type – The the dot11 type (11a/11g etc) of
the radio