Network Router User Manual

322 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Global Configuration commands
5
arp
Global Configuration commands
Configures Address Resolution Protocol
Supported in the following platforms:
• Mobility RFS4000 Controller
• Mobility RFS6000 Controller
• Mobility RFS7000 Controller
Syntax
arp [<WORD>|ge <1-5>|sa <1-6>|up1|vlan <1-4094|
wwan]{<AB.C.D> <AA-BB-CC-DD-EE-FF>}
Parameters
Example
RFController(config)# arp ge 2 1.2.3.4 11-22-33-44-55-66
RFController(config)
arp [<WORD>|ge <1-5>|sa
<1-6>|up1|vlan <1-4094|
wwan] {<AB.C.D>
<AA-BB-CC-DD-EE-FF>}
Configures address resolution protocol.
• <WORD> – Configures interface name
• ge <1-5> – Configures Gigabit Ethernet interface
• sa <1-6> – Configures Static Aggregate interface
• up1 – Configures WAN interface
• vlan <1-4094> – Configures vlan
• wwan – Configures wireless WAN interface
The following parameters are common for all the above.
• <A.B.C.D> – Displays Internet Protocol
• <AA-BB-CC-DD-EE-FF> – Displays MAC address