Network Router User Manual

282 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Global Configuration commands
5
Parameters
Usage Guidelines
The
service password-encryption set by the user cannot be disabled without knowing the old
password. Refer the note below for more clarification.
advanced-vty Enables advanced mode vty interface
dhcp Enables the DHCP server service
diag [enable|limit|period|
tech-support-period|
tech-support-url]
Services diagnostics configuration.
• enable – Enable in service diagnostics
• limit – Displays diagnostic limit command
• period <100-30000> – Sets diagnostics period
• tech-support-period <10-10080> – Sets the tech support
period. Default is 1440 minutes (1day)
• tech-support-url <URL> – Sets the tech support URL to
<URL>. This is used during auto generated tech support
dumps
password-encryption secret
2 <secret>
Encrypts passwords in configuration.
• secret 2 <secret> – Encrypt passwords with secret
phrase
• 2 – Type of encryption SHA256-AES256
• <secret> – Passphrase for encryption
pm sys-restart Process Monitor.
• sys-restart – Enable PM to restart the system when a
processes fails
Note: The process restart is one count less than what is
configured.
prompt crash-info Enables crash-info prompt
radius {restart} Enables RADIUS server.
• restart – Restarts the RADIUS server
redundancy
dynamic-ap-load-balance
start
Starts Dynamic AP Load Balancing service for redundancy
support.
set
[command-history|reboot-hi
story|upgrade-history]
Sets service parameters.
• command-history <10-300> – Sets the number of previous
commands to remember. Default 200
• reboot-history <10-100> – Sets the number of previous
reboot details to remember. Default 50
• upgrade-history <10-100> – Sets the number of previous
upgrade details to remember. Default 50
show cli Shows running system information. Shows the CLI commands for
the current mode.
terminal-length <0-512> System wide terminal length configuration.
watchdog Enables service for watchdog.