Network Router User Manual

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 115
53-1001931-01
show
2
smart-rf
[calibration-status|
configuration|
history|radio]
Displays smart-rf related management information
• calibration-status – Displays smart-rf calibration status
• configuration – Displays smart-rf configuration information
• history – Displays smart-rf assignment history since last
calibration.
• radio
[config|local-status|map|master-status|neighbors|spectru
m] {[<1-4096>|<MAC>|
all-11a|all-11bg]} – Displays smart-rf radio commands.
• config – Displays the configuration information
• local-status – Displays the local radio status related to
smart rf
• map – Maps all 11a radios in the configuration
• master-status – Displays the radio status from the
master radio list. If no parameter is passed, displays
status for all radios in the master list
• neighbors – Displays the radio’s neighbor information
• spectrum – Displays all 11a radios spectrum
information <1-4096> – The selected radio
• <MAC> – The selected radio MAC address
• all-11a – All 11a radios
• all-11bg – All 11bg radios
unapproved-aps Defines unapproved APs seen by an access point or a wireless
client scan
wireless-controller-statistics
{detail}
Displays wireless-controller statistics
• detail – Optional Displays detailed wireless-controller
statistics
wlan [config|statistics] Displays wireless LAN parameters. The following information is
displayed:
• config [<1-256>|all|enabled] – Displays the wireless LAN
configuration information. All parameters optional
• <1-256> – The selected wlan
• all – all wlans in the configuration
• enabled – all wlans that are enabled. Configuration
information for disabled wlans are not displayed
• statistics <1-256> – Displays the wireless LAN statistics for:
• <1-256> {detail} – The selected wlan. Optionally display
details
wips
[configured-ap-def-essids|
configured-bad-essids|
fake-ap-flood|filter-list|
suspicious-ap]
Displays wips parameters
• configured-ap-def-essids – Displays the list of configured
default essids
• configured-bad-essids – Displays the list of configured bad
essids
• fake-ap-flood threshold – Displays fake-ap flood parameter
• threshold – Fake-AP Flood Threshold
• filter-list – Display the list of currently filtered mobile-units
• suspicious-ap – Displays suspicious- ap parameters
• signal-strength-threshold– Displays signal strength
threshold