Network Router User Manual

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 113
53-1001931-01
show
2
wireless-client
{[<1-8192>|<MAC>|associ
ation-history|
association-stats|probe-hist
ory|radio|roaming|statistics
|
voice|wlan]}
Displays the parameters of associated wireless clients. All
parameters are optional.
• <1-8192> – Index of wireless client
• <MAC> – MAC address of wireless client
• association-history {<MAC>}– Displays the association history
of the wireless clients with the MAC address and its
configured name.
• association-stats – Displays Statistics of associations and
reassociations
• probe-history [<1-200>|config-list] – Displays the probe
history of the wireless client with the address and its
configured name
• <1-200> – Defines index to display probe-logging
• config-list – Lists probe history MAC addresses
• radio <1-4096> – Displays the associated wireless clients for
the radio with the MAC address and its configured name.
• Mobility RFS7000 Controller supports <1-4096> radios
• Mobility RFS6000 Controller supports <1-1000> radios
• roaming database – Displays the local wireless-client
roaming database.
• statistics [<1-8192>|<MAC>|summary|voice] – Displays
wireless client RF statistics
• <1-8192> – Displays Index of wireless-client
• <MAC> {detail}– Displays MAC address of
wireless-client. Optionally display detailed information.
• summary – Displays RF-Stats summary of all currently
associated wireless-clients
• voice [<1-4096>|<MAC>] – Displays wireless-client
voice statistics for a radio index or radio MAC address.
• voice – Displays voice call details
• wlan <1-256> – Displays the Clients associated to the
selected wlan
multicast-packet-limit Displays the multicast-packet-limit
phrase-to-key
[wep128|wep64]
<pass-phrase>
Displays the WEP keys generated by a passphrase
• wep128 – Displays WEP128 keys
• wep64 – Displays WEP64 keys
• <pass-phrase> – The passphrase to generate the keys for
qos-mapping {[
wired-to-wireless|
wireless-to-wired]}
Quality of service mappings used for mapping WMM access
categories and 802.1p/DSCP tags
• wired-to-wireless – Mappings used when traffic is switched
from the wired to the wireless side
• wireless-to-wired – Mappings used when traffic is switched
from the wireless to the wired side