QuickSpecs

2000 Array Performance P2000 G3 FC P2000 G3
SAS
P2000 G3 10GbE
iSCSI
(preliminary)
Protocol (host connect) 8 Gb Fibre Channel 6 Gb SAS 10Gb Ethernet
2000 RAID 10 Performance Results
Sequential Reads MB/s 1,572 1,572 1,500
Sequential Writes MB/s 790 787 775
Random Mix IOPs 60/40
read/write
18,698 19,682 15,500
2000 RAID 5 Performance Results
Sequential Reads MB/s 1,572 1,572 1,500
Sequential Writes MB/s
1,195 1,172 1,000
Random Mix IOPs 60/40
read/write
12,511 12,835 10,500
2000 RAID 6 Performance Results
Sequential Reads MB/s 1,572 1,572 1,500
Sequential Writes MB/s 1,173 1,024 1,000
Random Mix IOPs 60/40
read/write
7,362 8,044 6,500
Refer to the paper titled "Upgrading the HP StorageWorks MSA2000 (G1 or G2) to the P2000 G3
MSA ", available in the Resource Library at: www.hp.com/go/p2000 .
DC-power chassis HP is making the two models of controller-less chassis available with direct current (DC) power
supplies. They each have the two empty bays where users can insert one or two P2000 G3
controller(s). In addition, the P2000 chassis with LFF drive bay can have P2000 3.5-inch I/O
modules inserted to create a LFF DC-power JBOD.
The 500 watt power supply is designed to operate over the input range of -40VDC to -75VDC.
HP StorageWorks P2000 DC-power LFF twelve 3.5-in Drive Bays
(supports up to 2 controllers or I/O modules)
AP840A
HP StorageWorks P2000 DC-power SFF twenty-four 2.5-in Drive Bays
(supports up to 2 controllers, not I/O modules)
AP841A
Configuration and
Management Tools
HP StorageWorks Storage Management Utility (SMU). Management access, out-of-band: WEB
GUI, CLI. Interface Types: USB, 10/100 Ethernet. Protocols Supported SNMP, SMI-S, SSL, SSH,
SMTP, FTP, HTTP, Telnet
P2000 Software and
Documents
Support CD
All product documentation (CD can be used on ALL supported server Operating Systems.)
MSA Device Discovery Tool (Win and Linux) - reports P2000/MSA HW devices, and
supported storage software
Host Software Bundles (Win and Linux for both ProLiant x86, ProLiant x64 and Integrity
IA64servers)
CD updated quarterly on HP.com with sustaining firmware updates
Hot Plug Expansion
and Replacement
Support
All P2000 G3 models support hot plug expansion and replacement of redundant controllers,
enclosures, fans, power supplies, and I/O modules for simple, fast installation and maintenance.
Snapshot and Clone All G3 arrays come standard with 64 snaps, 512 snaps available. Controller based functionality.
Offers higher levels of data protection, enabling an almost instant recovery from data failure or
corruption. Offers alternative development testing of 'offline' production data and the ability to
backup snapped/cloned data.
Overview The P2000 G3 arrays come integrated with web browser and CLI based software for storage and
RAID management, setup, configuration, and troubleshooting. This reduces the cost of ownership
by reducing the training and technical expertise necessary to install and maintain your HP storage
solution.
The SPOCK database provides interoperability information for thousands of components and
QuickSpecs
HP StorageWorks P2000 G3 Modular Smart Array
Systems
Family Information
DA - 13551 Worldwide QuickSpecs — Version 7 — 9.27.2010 Page 11