QuickSpecs

P2000 G3 FC
P2000 G3 FC/iSCSI
POWER REQUIREMENTS
Input Power
Requirements
(typical-running I/O)
8G FC (2 Port - 8G FC)
110 VAC ; 3.7A,370W 220VAC. 1.7A,408W
FC/iSCSI Combo ( 2 Port- 8G FC + 2 Port - 1G iSCSI)
110 VAC ; 3.9A,390W 220VAC. 1.7A,408W
Max Input Power 100-240 VAC, 50/60 Hz., 4.5-1.9A; 48-60 VDC 10.4A/8.3A
Heat Dissipation 1622 BTU/hr
TEMPERATURE AND HUMIDITY RANGES
Operating Temperature 41°F to 104°F (5°C to 40°C)
Shipping Temperature -40°F to 158°F (-40°C to 70°C)
Operating Humidity 10% to 90% RH @ 104°F (40°C) non-condensing
Non-Operating Humidity Up to 93% RH @ 104°F (40°C)
DECLARED ACOUSTIC NOISE LEVELS
Sound Power A weighted sound power LWAd=6,75 B
Sound Pressure A weighted sound pressure LpAm - 55dB
SHOCK AND VIBRATION
Shock, Operational 10G's for 10 milliseconds
Shock, Non-Operational 15G 11ms half sine
Vibration, Operational 5-500Hz, 0.21Grms flat
Vibration, Non-
Operational
3-365-3Hz, 1.22 Grms,z-axis,0.85 Grms, X&Y axis shaped spectrum
PHYSICAL
Height 3.5 in/ 8.9 cm
Depth (excluding cables)
(back of ear to back of
controller handle)
P2000 G3 FC SFF 24-bay array: 20.28 in / 51.510 cm
P2000 G3 FC LFF 12-bay array: 21.3 in. / 55.1 cm
Width (body only) 17.6 in / 44.7 cm (w/ ears 19 in / 48.26 cm)
Chassis Weight
(no controllers)
P2000 LFF chassis: 44 lbs.
P2000 SFF chassis: 43 lbs
P2000 G3 FC and
FC/iSCSI Combo
Controller
User Interface Status and activity provided via management interfaces. Status
Indicators on front of Controller
RAID Support 0, 1, 3, 5, 6, 10, 50
Cache Memory 1GB Read/Write. ECC protection with backup to Flash memory
(indefinite backup)
Cache Backup ECC protection with back up to flash memory (indefinite backup)
Upgradeable Firmware yes
Disk Drive and
Enclosure Protocol
Support
6 Gb SAS - Serial Attached SCSI
Expansion Port SAS (SFF8088) 4x lane 6 Gb SAS
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Technical Specifications
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010 Page 28