QuickSpecs

HP StorageWorks D2700 Disk Enclosure
Rear Panel components
1. Power Supply 1 4. I/O Module A 7. Rear UID push button
2. Power Supply 2 5. I/O Module B 8. Enclosure LEDs
3. Fan 1 6. Fan 2 9. Power on/standby button
P2000 Dual I/O 3.5-inch 12 Drive Enclosure
Rear Panel components
1. Service Port 4. DC Voltage / Fan Fault 6. SAS In Port
2. Unit Locator 5. AC Power Good 7. SAS Out Port
3. Power Switch
Configure to Order Program Information
HP introduces the Configure to Order program for the P2000 G3 family The P2000 G3 models and options may or may not
be factory installed in a rack with add-on controllers, switches, hubs, P2000 disk enclosures and hard drives. The P2000 G3
arrays may be integrated with ProLiant servers or as standalone storage.
Orders to be shipped through the CTO process must have a minimum of two drives ordered per controller. SAN Starter Kits
are not eligible for CTO.
Description Product #
P2000 G3 FC Controllers & Controller-less Chassis
HP StorageWorks P2000 G3 FC Modular Smart Array Controller
(two 8Gb FC ports)
AP836A#0D1
HP StorageWorks P2000 G3 FC/iSCSI Combo Modular Smart Array Controller
(two 8Gb FC ports and two 1GbE iSCSI ports)
AP837A#0D1
HP StorageWorks P2000 Modular Smart Array 3.5-in Drive Bay Chassis (LFF)
(Will accept one or two controllers or Disk Enclosure I/O modules)
AP838A#0D1
HP StorageWorks P2000 Modular Smart Array 2.5-in Drive Bay Chassis (SFF)
(Will accept one or two controllers, not I/O modules)
AP839A#0D1
Disk Enclosures
QuickSpecs
HP StorageWorks P2000 G3 FC Modular Smart Array
System
Configuration Information
DA - 13551 Worldwide QuickSpecs — Version 1 — 2.16.2010 Page 21