QuickSpecs

HP P2000 G3 SAS MSA Array System Controller
NOTE: (1 or 2) with four 6Gb SAS ports per controller. NEBS
certified.
AW592A AW592B
HP Modular Smart Array SC08e 2-ports Ext PCIe x8 SAS Host
Bus Adapter
614988-B21
SFF Carrier-grade (only) DC-power JBOD
HP P2000 2.5-in Dual I/O DC-power Drive Enclosure.
NOTE: NEBS certified.
24-drive SFF bays, NEBS certified, NOTE: only sold with carrier-
grade arrays
BV921A BV921B
Drives, carrier-grade (all NEBS certified)
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise
3yr Warranty Hard Drive
512547-B21
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise
3yr Warranty Hard Drive
507127-B21
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise
3yr Warranty Hard Drive
581284-B21
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise
3yr Warranty Hard Drive
581286-B21
Carrier-grade HBA
HP FC2242SR 4Gb 2-port PCIe Fibre Channel Host Bus
Adapter
A8003A A8003B
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
NOTE: Emulex 82E
AJ763A AJ763B
For more information on HP Carrier Grade Platforms go to
http://www.hp.com/products1/servers/carrier_grade/
index.html?jumpid=reg_R1002_USEN
HP P2000 Remote Snap
Software
(G3 FC and FC/iSCSI,
1GbE and 10GbE iSCSI
controllers only)
HP P2000 Remote Snap Software is array based software that provides remote
replication on the HP P2000 G3 MSA Array products (except SAS model). HP Remote
Snap is a form of asynchronous replication which consists of replication of block-level
data from a volume on a local system to a volume that may be on the same system or on
a second independent system. This second system may be collocated with the first
system or may be located at a remote site. It requires T230Rxx controller firmware or
higher.
HP Remote Snap functionality is based on existing Snapshot technology offered by HP
P2000 SAN Array products. Snapshots are used to track the data to be replicated as well
as to determine the differences in data updated on the master volume, minimizing the
amount of data to be transferred.
HP Remote Snap replication technology provides the ability to accomplish key data
management and protection capabilities. First, because Remote Snap uses snapshots as
the underlying technology it creates multiple local recovery points which can be used for
such tasks as to complement daily backups; second, replication provides the ability to
access data in a remote site which could be used for dispersed operations; and third but
definitely not least important replication allows for business continuance in the event of a
failure on the primary site.
In order to perform a replication, a snapshot of the volume to be replicated is taken,
creating a point-in-time image of the data. This point-in-time image is then replicated to
the destination volume by copying the data represented by the snapshot via a transport
medium such as TCP/IP (iSCSI) or Fibre Channel. The amount of data transferred is
minimized though the use of snapshots whenever possible.
HP P2000 Array System Remote Snap Software LTU TA808A
HP P2000 Array System Remote Snap Software E-LTU TA808AAE
QuickSpecs
HP MSA P2000 G3 Modular Smart Array System
Optional Software
DA - 13551 Worldwide QuickSpecs — Version 27 — 8.23.2012 Page 23