Installation guide

64 Brocade ServerIron ADX Installation Guide
53-1003445-01
Replacing a Fan Tray
2
Replacing the air filter in the ServerIron ADX 10000
The fan filter in the ServerIron ADX 10000 can be replaced with the fan assembly installed in the
chassis and in operation as described in the following steps.
1. Loosen the four thumb screws (black) in the front of the filter retainer.
2. Pull the filter retainer away from the fan assembly (shown in Figure 45)
FIGURE 45 Air Filter Removal and Replacement for the ServerIron ADX 10000
1 Thumb screws (four) 3 Fanfilter
2 Filter retainer 4 Fan assembly