Installation guide

62 Brocade ServerIron ADX Installation Guide
53-1003445-01
Replacing a Fan Tray
2
4. Plug the chassis back in and power up.
FIGURE 43 Replacing a Fan from a ServerIron 4000 or ServerIron 8000
Replacing the ServerIron ADX 10000 Fan Tray
To replace the ServerIron ADX 10000 fan tray, follow these steps.
1. Power down and unplug the chassis.
2. Use a #2 phillips screwdriver to loosen the captive screws. These are the silver screws.
3. Use the handles to pull the fan tray from the chassis.
4. Slide the new fan-tray in until it is secure in the chassis.
5. Use a #2 phillips screwdriver to tighten the captive screws (silver).
6. Plug the chassis back in and power up.