Installation guide

Brocade ServerIron ADX Installation Guide 39
53-1003445-01
Installing ServerIron ADX
2
Connecting DC Power to ServerIron ADX 1000
To connect a DC power source to the ServerIron ADX 1000, follow these steps.
1. Insert the wires into the DC wiring assembly (Figure 31).
2. Use the wire tightening screws to secure the wires.
FIGURE 31 The ServerIron ADX 1000 DC Power Supply
3. Push the DC wiring assembly into the power supply and attach it using the assembly screws.
4. Slide the DC power supply into the ServerIron ADX 1000 chassis and tighten it using the
chassis attachment screws.
The equipment installation shall meet NEC/CEC code requirements. Consult local authorities
for regulations.
1 Wire Tightening Screws 2 Assembly Screws