Installation guide

36 Brocade ServerIron ADX Installation Guide
53-1003445-01
Installing ServerIron ADX
2
CAUTION
AC and DC power supplies can be grounded to a common bonding network or to an isolated
bonding network
CAUTION
For the NEBS compliant installation, the ServerIron ADX 10000 must be grounded to a common
bonding network.
To connect AC power, follow these steps.
1. Locate the power receptacle where the power supplies have been installed.
2. Lift the cord-retainer and connect a Brocade-supplied AC power cord to the power supply.
3. Snap the cord-retainer over the power plug to hold it in place.
FIGURE 27 AC Power Connections on the ServerIron ADX 1000 Chassis
FIGURE 28 AC Power Connections on the ServerIron ADX 4000 Chassis
FIGURE 29 AC Power Connections on the ServerIron ADX 8000 Chassis
1Power Supply Status LED