Installation guide

22 Brocade ServerIron ADX Installation Guide
53-1003445-01
Installing ServerIron ADX
2
FIGURE 16 Positioning the Screws in a Rack - ServerIron ADX 4000, ServerIron ADX 8000 and ServerIron ADX
10000
3. Starting with the chassis that you want to mount in the lowest position in the rack, mount the
chassis in the rack. Slip the wide portion of each keyhole slot over the corresponding screw in
the rack.
4. For the ServerIron ADX 4000, ServerIron ADX 8000 or ServerIron ADX 10000, slide the chassis
down so that the screw heads are in the narrow portion of the keyhole slots.
5. Tighten the screws to secure the chassis in place.
NOTE
To provide better grounding of the chassis to the rack, attach the chassis to the rack using star
washers. Additionally, if any single hole grounding lugs are used, star washers shall be used as a
means to prevent rotation of the lug.
6. Repeat step 2 through step 5 to mount each subsequent chassis in the same rack.