Installation guide

Brocade ServerIron ADX Installation Guide 3
53-1003445-01
ServerIron ADX chassis devices
1
ServerIron ADX 4000
Figure 3 shows the ServerIron ADX 4000 chassis.
FIGURE 3 ServerIron ADX 4000 Chassis
ServerIron ADX 4000 chassis basics are as follows:
• 4 RU form factor.
• Two hot-pluggable AC or DC power supplies (one+one redundant).
One power supply is required, and one is optional for redundancy. By default, the system ships
with one power supply.
• One hot-pluggable fan tray with three fans.
• Side-to-side air cooling - left-to-right.
• Card slots to accommodate modules.
A fully-loaded ServerIron ADX 4000 can accommodate the following components.
• Two Ethernet Interface Modules
• Two Application Services Modules (ASM)
• One Management Module (MM)
• One Switch Fabric Module (SFM)
• One fan tray
• Two AC or DC power supplies (one required, one redundant)
For installation details, refer to “Installing modules in ServerIron ADX chassis devices” on page 23.