User's Manual

Brocade Network Advisor IP User Manual 887
53-1003056-01
VPLS Manager
28
Viewing Saved VPLS configurations
To view current VPLS configurations, do the following:
1. Select Configure > MPLS > VPLS.
2. Select the Saved Configurations tab (Figure 362).
FIGURE 362 VPLS Manager Saved Configurations tab
3. You can use the Name field to filter output by configuration name.
You can use an Asterisk (*) as a wild card character.
4. Click Get to begin the search.
Configurations that match the filter criteria display under Saved Configurations, showing the
configuration ID, the configuration name, and the name of the user that created the
configuration.
When you select a configuration, configuration information displays in the fields below Saved
Configurations.
• VPLS Settings — Displays the following information about a selected VLL in the fields
below:
 Configuration ID — The VCID of the VPLS.
 Name — The name of the VPLS.
 Status — Current status of the VPLS. This status is derived from the state of all PE
devices for a VPLS.