User's Manual

Brocade Network Advisor IP User Manual 825
53-1003056-01
VLAN Manager
27
4. Click a product under a port VLAN to select it. The interfaces on that product that belong to the
VLAN are listed in the interface list.
The list shows the following information:
• Port — The interface number. This can be a port number represented as a unit, slot
number or port number, or a virtual routing interface ID.
• Port Type — A description of the type of interface on the product, for example,
ETHERNET_INTERFACE or VIRTUAL_INTERFACE.
• Port Name — The name of the interface, if one was configured.
• Port Mode — Indicates the tag mode of the interface. Tagged represents the port is in dual
mode but is in the tagged state for that particular VLAN. Untagged represents the port is
untagged for that particular VLAN. The third port mode is Converged.
• STP — Indicates whether STP is enabled or disabled.
• Path Cost — The STP cost of using the port to reach the root bridge.
• Port Priority — The preference that STP gives this port relative to other ports for forwarding
traffic out of the spanning tree.
• Classifiers — The VLAN Classifier group IDs associated with Access/Converged ports and
link aggregation groups. The following values are displayed if Virtual Fabrics is configured
on a Network OS device.
- cTag -— Tagged mode
- MAC Address and MAC Group ID — Untagged mode
Displaying VLANs by products
The Product View tab of the VLAN Manager dialog box presents the products that have been
discovered on the network and the VLANs that have been assigned to them.
NOTE
Only products assigned to Management application areas of responsibility (AORs) are listed under
the VLANs in the Product View tab.
To view VLANs, complete the following steps.
1. Click the Product View tab in the VLAN Manager dialog box.
The Product View tab of the VLAN Manager dialog box displays (Figure 319).