User's Manual

758 Brocade Network Advisor IP User Manual
53-1003056-01
Configuration snapshots
23
• Match Case check box — Click to render the search case-sensitive.
• Repeats check box — Click to continue the search at the top when the bottom is reached.
6. Click Close.
Generating a configuration snapshot report
If the configuration snapshot list is too long, you can condense the list by running a report. To
generate a configuration snapshot report, perform the following steps.
1. Click the IP tab.
2. Select Configure > Configuration > Configuration Repository.
3. Click the Configuration Snapshots tab.
4. Click the Report button.
The Configuration Snapshot Report dialog box displays, as shown in Figure 290.
FIGURE 290 Configuration Snapshot Report dialog box
5. Select the start date and end date of the configuration snapshots you want to view.
6. Click Find.
The Management application displays the list of snapshots that match the start date and end
date you specified.
7. You can expand each tree node to view details about the configuration snapshot. Expand the
configuration snapshot name under the Device Configuration column to display the list of
configuration snapshots that have been recorded for that device configuration.
8. Expand a specific configuration snapshot folder to display the status of each record. Status
can be one of the following:
• Not Applicable
• Change — The device configuration deployment included both pre- and post-configuration
snapshot options. There is a difference between the pre-configuration snapshot and the
post- configuration snapshot.