Manualshelf

User's Manual

ManualsBrandsBrocade Communications Systems ManualsNetwork HardwareBrocade Communications Systems Access Point IP250
801802803804805806807808809810
Brocade Network Advisor IP User Manual 755
53-1003056-01
Configuration snapshots
23
5. Click OK to save the configuration.
6. Click Close to exit the dialog box.
Configuration snapshots
The Configuration Repository dialog box - Configuration Snapshots tab, shown in Figure 288, allows
you to compare two configuration snapshots; for example, the pre-configuration and
post-configuration snapshots.
1. Click the IP tab.
2. Select Configure > Configuration > Configuration Repository.
3. Click the Configuration Snapshots tab.
The Configuration Snapshots tab displays, as shown in Figure 288.
FIGURE 288 Configuration Repository dialog box - Configuration Snapshots tab
The Configuration Snapshots tab displays the following information:
• Product Name — The name of the product
• Product Snapshots — The product snapshots
• Date — The date when the snapshot file was stored in the server
• Snapshot Type — The type of snapshot generated. There are three types:
Manual: Generated manually by clicking the Save Snapshot button on the Backup
Configuration Manager.
Pre-Snapshot: Generated before the new configuration was deployed to the device.
Post-Snapshot: Generated after the new configuration was deployed to the device.
• CLI Template — The name of the snapshot template used for the pre- or post-snapshot
deployment.
• Status — The snapshot status