User's Manual

602 Brocade Network Advisor IP User Manual
53-1003056-01
Layer 3 access control list policy
18
14. Click OK on the Advanced Settings dialog box.
To finish configuring the ACL, return to one of the following procedures:
• “Creating an extended L3 ACL configuration” on page 585
• “Editing an extended L3 ACL configuration” on page 587
• “Copying an extended L3 ACL configuration” on page 588
• “Creating an IPv6 L3 ACL configuration” on page 590
• “Editing an IPv6 L3 ACL configuration” on page 592
• “Copying an IPv6 L3 ACL configuration” on page 593
Network configuration
The Management application allows you to filter traffic from a specific Network. A Network is made
up of one or more devices in a subnet. Use the following procedures to configure a network:
• “Viewing existing networks” on page 602
• “Creating a network” on page 603
• “Editing a network” on page 604
• “Copying a network” on page 605
• “Deleting a network” on page 605
Viewing existing networks
You can access the Network dialog box when configuring a standard or extended L3 ACL device
configuration. To configure a standard or extended L3 ACL, refer to one of the following procedures:
• “Creating a standard L3 ACL configuration” on page 581
• “Editing a standard L3 ACL configuration” on page 584
• “Copying a standard L3 ACL configuration” on page 585
• “Creating an extended L3 ACL configuration” on page 585
• “Editing an extended L3 ACL configuration” on page 587
• “Copying an extended L3 ACL configuration” on page 588
To view all existing networks, complete the following steps.