User's Manual

8 Brocade Network Advisor IP User Manual
53-1003056-01
Management server and client
1
If you enter a port number already in use, a Warning displays next to the associated port
number field. Edit that port number and click Next.
7. Verify your configuration information on the Server Configuration Summary screen and click
Next.
8. Complete the following steps on the Start Server screen:
a. Select the Start Client check box, if necessary.
b. Click Finish.
After all of the services (Server and Client) are started, the Log In dialog box displays.
9. Click Yes on the restart server confirmation message.
10. Choose one of the following optins:
• If you configured authentication to CAC, enter your PIN in the CAC PIN field.
• If you configured authentication to the local database, an external server (RADIUS, LDAP,
or TACACS+), or a switch, enter your user name and password.
The defaults are Administrator and password, respectively.
NOTE
Do not enter Domain\User_Name in the User ID field for LDAP server authentication.
11. Click Login.
12. Click OK on the Login Banner.
Viewing active sessions
To view the Management application active sessions, complete the following steps.
1. Select Server > Active Sessions.
The Active Sessions dialog box displays (Figure 5).
FIGURE 4 Active Sessions dialog box
2. Review the active session information.
The following information displays:
• ID — Displays the name of the user (for example, Administrator).
• Description — Displays the description of the user (for example, Operator).
• Network Address — Displays the network address of the user.