User's Manual

Brocade Network Advisor IP User Manual 541
53-1003056-01
FCoE login groups
16
7. Click OK.
The FCoE Login Group Confirmation and Status dialog displays.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.
On closing the FCoE Login Group Confirmation and Status dialog box, the FCoE Configuration
Dialog refreshes the data and the latest information is displayed.
• “FCoE login groups”
Editing an FCoE login group
Complete the following steps to edit the name of a login group. You can manually add ports by
entering the world wide name (WWN) or select available managed CNAs from all discovered hosts.
Only directly-connected devices are supported.
1. Select Configure > FCoE from the menu bar.
2. Select a group from the Login Groups list and click Edit.
The Edit Login Group dialog box displays, as shown in Figure 186.
FIGURE 201 Edit Login Group dialog box
NOTE
The Fabric field and the Switch field are read-only fields.
3. Perform one of the following editing tasks:
• Rename the login group by entering the new name into the Name field. The Allow All option
must be selected to rename the login group.
• Select one of the following options to add or remove login members into the Available
Members list. The Allow Specific option must be selected to add or remove login members.
• Port WWN — Click to enter the world wide name (WWN) of the port to associate with
the selected switch. The member port WWN text field allows a maximum of 16 digits.