User's Manual

Brocade Network Advisor IP User Manual 537
53-1003056-01
DCB performance
16
Generating a real-time performance graph from the IP tab
To generate a real-time performance graph for a Network OS or FOS DCB switch, complete the
following steps.
1. Click the IP tab.
2. Select a DCB port from the DCB Configuration dialog box, and select Real Time Graph from the
Performance list.
A message displays, prompting you to close the DCB Configuration dialog box.
3. Click OK to close the DCB Configuration dialog and open the Performance dialog box.
The Real Time Performance Graphs dialog box displays, as shown in Figure 197.
FIGURE 197 Real Time Performance Graphs dialog box - IP tab
For complete information about Real Time Performance Graphs, refer to “SAN real-time
performance data” on page 976.
Historical performance graph
The Historical Performance Graph dialog box enables you to customize how you want the historical
performance information to display.
Generating a historical performance graph
You can generate a historical performance graph by selecting both Network OS and FOS DCB
devices from the IP Tab or by selecting only Network OS DCB devices from the IP tab.