Manualshelf

User's Manual

ManualsBrandsBrocade Communications Systems ManualsNetwork HardwareBrocade Communications Systems Access Point IP250
531532533534535536537538539540
480 Brocade Network Advisor IP User Manual
53-1003056-01
Backup support
15
Enabling backup
Backup is enabled by default. However, if it has been disabled, complete the following steps to
enable the function.
1. Select Server > Options.
The Options dialog box displays.
2. Select Server Backup in the Category list.
3. Select the Enable Backup check box.
4. Click Apply or OK.
Disabling backup
Backup is enabled by default. If you want to stop the backup process, you must disable backup. To
disable the backup function, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Server Backup in the Category list.
3. Clear the Enable Backup check box.
4. Click Apply or OK.