User's Manual

Brocade Network Advisor IP User Manual 439
53-1003056-01
Port profiles
14
• Name Match — Compares the original profile with the profile with the same name on the
target switch.
• Network Match — Finds a profile on the target switch to provide the same networking
settings on the target switch.
NOTE
Select a column or multiple columns in the Comparison Summary list, as shown in Table 45, and
click Remove to remove it as matching criteria. The Reference Profile column cannot be removed.
TABLE 45 Profile Comparison Summary list
Field/Component Description
Profile Properties • Match Type — The type of comparison criteria: MAC match, name
(profile name) match, or network match
• Overall Match — The icon that signals if there is an exact match
(green circle icon) or a partial match (yellow triangle icon)
• Profile Name — The profile name that is compared against the
target MAC address
• Associated MAC Count — The number of associated MAC addresses
• MAC Comparison — Indicates whether the compared MAC
addresses are the same or different
VLAN Settings
• L2 Mode — The switch port mode of the port profile (access or
trunk)
• Configuration — One of the following VLAN configuration options:
- All — Indicates that the port profile will allow all VLAN IDs
- None — Indicates that the port profile will not allow any VLAN
IDs
- All Except <VLAN IDs> — Indicates that the port profile will
allow any packet except the VLAN IDs specified
- <VLAN IDs> — Indicates that the port profile will allow any
packet with the VLAN IDs specified
• Untagged VLAN — The port VLAN assigned to the interface as
untagged
• Tagged VLAN Count — The number of port VLANs assigned to the
interface as tagged
• Tagged VLAN Comparison — Indicates whether the compared
tagged VLANs are the same or different