User's Manual

Brocade Network Advisor IP User Manual 399
53-1003056-01
SMI Agent Configuration Tool
12
,(RegisteredProfilesSupported=SNIA:SMI-S,DMTF:Profile Registration,SNIA:FC
HBA,DMTF:LaunchInContext,SNIA:Fan,SNIA:Fabric,SNIA:Switch,DMTF:Role Based
Authorization,SNIA:Power Supply,SNIA:Sensors,SNIA:Server)
• slptool findattrs service:wbem:http://IP_Address:Port
NOTE
Where IP_Address:Port is the IP address and port number that display when you use the
slptool findsrvs service:wbem command.
Use this command to verify that the Management application SMI Agent SLP service is properly
advertising its WBEM SLP template over the HTTPS protocol.
Example output:
Install_Home\cimom\bin>slptool findattrs service:wbem:
https://10.24.35.61:5989(template-type=wbem),(template-version=1.0),(template
-description=This template describes the attributes used for advertising WBEM
Servers),(template-url-syntax=https://10.24.35.61:5989),(service-hi-name=WBEM
Solutions J WBEM Server),(service-hi-description=WBEM Solutions J WBEM
Server),(service-id=WBEMSolutions:f1f65c3b-27f1-4b70-9ced-e412e93a8d5e),(Comm
unicationMechanism=CIM-XML),(OtherCommunicationMechanismDescription
=null),(InteropSchemaNamespace=interop),(ProtocolVersion=1.2),(FunctionalProf
ilesSupported=Basic Read,Basic Write,Schema Manipulation,Instance
Manipulation,Association Traversal,Query Execution,Qualifier Declaration,
Indications),(FunctionalProfileDescriptions=null),
(MultipleOperationsSupported=true),(AuthenticationMechanismsSupported=Basic),
(AuthenticationMechanismDescriptions=null),(Namespace=root/brocade1,interop),
(Classinfo=0,0),(RegisteredProfilesSupported=SNIA:SMI-S,DMTF:Profile
Registration,SNIA:FC HBA,DMTF:LaunchInContext,SNIA:Fan,SNIA:Fabric,
SNIA:Switch,DMTF:Role Based Authorization,SNIA:Power Supply,SNIA:Sensors,
SNIA:Server)
SLP on UNIX systems
This section describes how to verify the SLP daemon on UNIX systems.
SLP file locations on UNIX systems
• SLP log — Install_Home/cimom /cfg/slp.log
• SLP daemon — Install_Home/cimom /cfg/slp.conf
You can reconfigure the SLP daemon by modifying this file.
• SLP register — Install_Home/cimom /cfg/slp.reg
You can statically register an application that does not dynamically register with SLP using
SLPAPIs by modifying this file. For more information about these files, read the comments
contained in them, or refer to http://www.openslp.org/doc/html/UsersGuide/index.html.
Verifying SLP service installation and operation on UNIX systems
1. Open a command window.
2. Type % su root and press Enter to become the root user.
3. Type # Install_Home/cimom/bin/slptool findsrvs service:service-agent and press Enter to
verify the SLP service is running as a Service Agent (SA).