User's Manual

250 Brocade Network Advisor IP User Manual
53-1003056-01
Performance monitors
7
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• Runtime Errors— The number (error count) of runtime errors for the duration specified in the
monitor.
• Runtime Errors/sec — The number (error rate) of runtime errors per second for the duration
specified in the monitor.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The time of the last update for the monitor.
To edit a port performance monitor, refer to “Editing a preconfigured performance monitor” on
page 263.
Top Port Sync Losses monitor
The Top Port Sync Losses monitor (Figure 101) displays the top ports with synchronization failures
in a table.
FIGURE 101 Top Port Sync Losses monitor
The Top Port Sync Losses monitor includes the following data: