User's Manual

Brocade Network Advisor IP User Manual 247
53-1003056-01
Performance monitors
7
The Top Port Errors monitor includes the following data:
• Severity icon/monitor title — The worst severity of the data based on the error count shown
next to the monitor title.
• Port — The port affected by this monitor.
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• RX Errors/sec — The number (error rate) of receive errors per second for the duration specified
in the monitor.
• RX Errors — The number (error count) of receive errors.
• TX Errors/sec — The number (error rate) of transmit errors for the duration specified in the
monitor.
• TX Errors — The number (error count) of transmit errors.
• Product — The product affected by this monitor per second.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to “Editing a preconfigured performance monitor” on page 263.
Accessing additional data from the Top Port Errors monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to “Application menus” on
page 1261.
• Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to “Performance Data” on page 969.