User's Manual

152 Brocade Network Advisor IP User Manual
53-1003056-01
SNMP Trap Registration settings
5
The Syslog Registration pane displays (Figure 62).
FIGURE 62 Options dialog box (Syslog Registration pane)
3. Select the Auto register server as Syslog recipient check box, if necessary.
This check box is selected by default.
4. Click Apply or OK to save your work.
Configuring the Syslog listing port number
1. Select Server > Options.
The Options dialog box displays.
2. Select Syslog Registration in the Category pane.
The Syslog Registration pane displays (Figure 62).
3. Enter the Syslog listening port number of the Server in the Syslog Listening Port (Server) field,
if necessary.
The default Syslog listening port number is 514 and is automatically populated.
For Network OS devices, only the default port (514) can be registered as the Syslog Listening
Port.
4. Click Apply or OK to save your work.
SNMP Trap Registration settings
You can automatically register the server as the trap recipient on products. If SAN products have
Informs enabled, the registration is for the Informs.
Registering a server as a SNMP trap recipient automatically
1. Select Server > Options.
The Options dialog box displays.
2. Select Trap Registration in the Category pane.
The Trap Registration pane displays (Figure 63).