User's Manual

Brocade Network Advisor IP User Manual 143
53-1003056-01
Name settings
5
Fixing duplicate names
To fix duplicated names, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays.
2. Click Fix Duplicates.
The Duplicated Names dialog box displays (Figure 59).
FIGURE 59 Duplicated Names dialog box
The Duplicated Names dialog box contains the following information:
• Description — A description of the device.
• Duplicate Names table — Every instance of duplicate names.
 Fabric — The fabric name.
 FC Address — The Fibre Channel address.
 Names — The current name of the device.
If you selected the Append Incremental numbers for all repetitive names option, the
names display with the incremental numbering.
If you selected the I will fix them myself option, this field becomes editable.
 Operational Status — The operational status of the device. There are four possible
values:
- Up — Operation is normal.
- Down — The port is down or the route to the remote destination is disabled.
- Disabled — The connection has been manually disabled.
- Backup Active — The backup TCP port is active due to a failover.
 Port # — The port number.
 Type — The type of device.