User's Manual

Brocade Network Advisor IP User Manual 125
53-1003056-01
Port Groups
4
Viewing port group properties
To view port group properties, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Right-click the port group you want to view properties for in the Product List and select
Properties.
The Port Group Properties dialog box displays.
3. Review the information:
4. Click OK to close the dialog box.
TABLE 16
Field/Component Description
Properties tab Select to display information about the group.
Name The unique name (maximum 64 characters) for the product group.
Description The description (maximum 255 characters) for the product group.
Creator The user name of the creator (for example, Administrator).
Ports tab Select to display information about products in the group.
Port Count The number of ports in the group.
Port Actions list Select one of the following options:
• Enable
• Disable
• Display Attached Port Properties
Performance list Select to launch the real time or historical performance.
Identifier The identifier of the port.
Name The name of the port.
MAC Address The MAC Address of the port.
Port Status The status of the port.
Port State The state of the port.
Type The port type.
Speed The Speed of the port.
L2/Tag Mode Indicates whether L2 tag mode is enabled or disabled. If enabled,
indicates whether the port is tagged, untagged, or dual.
Untagged VLAN ID The untagged VLAN identifier of the port.
Duplex Mode The duplex mode of the port, such as auto-sense, full-duplex, or none.
Stacking Port Whether or not the port stacked.
Role The role of the device, such as Edge.
Product The name of the product.
User_defined_property (up to 3) A user-defined port property value. You can create up to 3 user-defined
properties (refer to “Properties customization” on page 1329).