User's Manual

122 Brocade Network Advisor IP User Manual
53-1003056-01
Port Groups
4
Deleting a product group
You can delete more than one group at a time.
NOTE
You cannot delete a system group.
To delete a product group, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Right-click the product group you want to delete in the Product List and select Delete Group.
Ctrl and click to select more than one group to delete.
A confirmation message displays.
3. Click Yes.
The group is deleted from the User-Defined Groups folder of the Product list.
Port Groups
Port groups allow you to group ports together across network devices to perform common
port-based configuration and monitoring activities.
Once configured you can use port groups to perform the following:
• Deploy common configurations to all ports in a group.
• Collect port usage data for all ports in a group.
You can see all port groups; however, under each group, you can only see devices that belong to
your area of responsibility (AOR). You can only see user-defined port groups that belong to your
AOR.
Creating a port group
To create a port group, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Select Add Port Group from the Grouping list on the Product List toolbar.
The Add Port Group dialog box displays.
3. Enter a unique name for the port group in the Name field.
4. Enter a description for the port group in the Description field.
5. Select one of the following options:
• All Ports — Select to display all ports.
• Ports Connected to APs — Select to display only ports connected to an access point (AP).