User's Manual

118 Brocade Network Advisor IP User Manual
53-1003056-01
Product group overview
4
9. Enter a value or regular expression in the Value/Regular Expression cell.
This field is case sensitive.
If you selected Status from the Property list, the following predefined values are populated in
the Value/Regular Expression cell:
• Reachable
• Not Reachable
• Down
• Healthy
• Marginal
• Degraded Link
• Unhealthy
If you selected Product Type from the Property list, the following predefined values are
populated in the Value/Regular Expression cell:
• L2 Switch
• Load Balancer
• Router
• Wireless Controller
• Wireless Standalone AP
To fetch products that have an empty value for a property, select the operator Equals from the
Operator list and leave the Value/Regular Expression field blank.
10. Select Value or Regular Expression from the Type list
To enter another set of criteria, click Insert. A new row displays in the Group Criteria table.
Continue with step 11.
To test the group criteria, click Test. The Management application uses the group criteria to
search the available products in your AOR. The products that meet the criteria display in the
Test Results. table. For detailed information about the test results, refer to “Viewing test
results” on page 120.
To group the criteria, go to step 12.
11. Select a connector (And/Or) from the Connector list and repeat step 8 thorugh step 11.
12. Highlight the rows you want to group and click Group.
An open paren and close paren display in the Group Criteria table to deliniate the new group.
You can create up to three groups.
To ungroup a group, select a row and click Ungroup. If the selected row is part of 2 groups, only
the inner group ungroups.
13. Click OK.
The new group displays in the User-Defined Groups folder of the Product list.