User's Manual

Brocade Network Advisor IP User Manual 1485
53-1003056-01
Database tables and fields
I
TABLE 245 MPLS_RSVP_LSP_FRR_PARAMETERS
Field Definition Format Size
MPLS_RSVP_LSP_FRR_PARAMETE
RS_DB_ID
Unique database generated identifier. int
BANDWIDTH Specifies the bandwidth constraint for the MPLS Fast
Reroute Path. The value 0 means that the detour route
uses a best-effort value for bandwidth.
int
HOP_LIMIT Represents the limit for the number of hops the LSP
can traverse. Accepted range is 0 - 255.
num (3,0)
IS_FACILITY_BACKUP Specifies whether the request for Facility backup is
enabled or not. If the FRR mode is facility then this
value will be 1. 0 otherwise.
num (1,0)
SETUP_PRIORITY The setup priority for MPLS Fast Reroute.Allowed range
between 0-7.
num (1,0)
HOLD_PRIORITY 'The hold priority for MPLS Fast Reroute. Allowed range
between 0-7.
num (1,0)
MPLS_LSP_DB_ID Database ID of the MPLS_RSVP_LSP instance which
these reroute parameters associated with.
int
TABLE 246 MPLS_RSVP_LSP_PARAMETERS
Field Definition Format Size
MPLS_RSVP_LSP_PARAMETERS_D
B_ID
Unique database generated identifier. int
IS_ADAPTIVE Indicates if the LSP supports adaptive mechanism or
not. Non Adaptive-0, Adaptive-1.
num (1,0)
BFD_TRANSMIT This object specifies the minimum interval, in
milliseconds, that the local system would like to use
when transmitting The Bidirectional Forwarding
Detection(BFD) Control packets. Accepts a range of
50-30000.
int
BFD_RECEIVE This object specifies the minimum interval, in
milliseconds, between received Bidirectional
Forwarding Detection (BFD) Control packets the local
system is capable of supporting. Accepts a range of
50-30000.
int
BFD_MULTIPLIER The Bidirectional Forwarding Detect time multiplier.
Accepts a range of 3-50.
int
COS The Class of Service for this LSP. Allowed range is 0-7
and 255. 255 means COS is not explicitly configured.
smallint
HOP_LIMIT Represents the limit for the number of hops the LSP
can traverse. Accepted range is 0-255.
num (3,0)
IS_CSPF Specifies whether the Constrained Shortest Path First
(CSPF) calculation is enabled. Possible values are
Disabled-0, Enabled-1.
num (1,0)
MTU Specifies the Maximum IP Packet Size of the packets
without being fragmented. Valid range is 0-65535.
num (4,0)
SETUP_PRIORITY The setup priority of the tunnel. Valid range is 0-7. num (1,0)