User's Manual

1328 Brocade Network Advisor IP User Manual
53-1003056-01
Host properties
E
WWN Source The source of the world wide name. Options include:
Fabric — The WWN is assigned from the fabric. The fabric assigned
address must be enabled.
Factory — The WWN is assigned at the factory.
Configuration
Configured State Indicates whether the port is enabled or disabled.
Max Bandwidth The maximum allowable bandwidth output for the selected port.
Operating State Indicates whether the port is online or offline.
Configured Speed The configured port speed.
Operating Speed The speed at which the port is operating.
Max Speed Supported The maximum speed that is supported on the port. For the FC port,
the maximum speed is 8 Gbps.
Configured Topology The configured topology setting: auto, point-to-point, or loop.
Operating Topology The operating topology setting: auto, point-to-point, or loop.
Boot over SAN Indicates whether boot over SAN is enabled.
Receive BB Credits The number of buffer credits received.
Transmit BB Credits The number of buffer credits transmitted.
IOC ID The IO Controller identifier.
Frame Field Size The frame size, in bytes, of the port.
Hardware Path The hardware path of the HBA.
Virtual Port Count The number of virtual ports associated with the HBA.
Operating State Displays details about the state of the following operating
parameters:
• Beacon State
• Link Beacon State
• MPIO Mode State
• Path Time Out
• Logging Level
• Target Rate Limit
• Default Rate Limit
FC-SP
Authentication Indicates whether FC-SP authentication is enabled or disabled.
FCSP Status Whether FC-SP authentication is being used.
Algorithm The configured authentication algorithm.
Group The DH group, which is DH-null (group 0), which is the only option.
Error Status The health status of the Fibre Channel Security Protocol parameters.
QoS
Configured QoS State Indicates whether QoS is enabled or disabled.
Operating QoS State Indicates whether QoS is on or off.
TABLE 31 Adapter port properties (Continued)
Field Description