User's Manual

Brocade Network Advisor IP User Manual 1325
53-1003056-01
IP device properties
E
FC Ports properties • Identifier — The identifier of the port.
• Name — The name of the port. This is an editable field. Enter a
name (up to 64 characters) for the port.
• WWN — The world wide name of the device.
• FC Address — The Fibre Channel address. Each FC port has both an
address identifier and a world wide name.
• Status — The operational status.
• Additional Info — Additional information about the port.
• Calculated Status — The calculated operational status. There are
four possible operation status values (Up, Down, Disabled , or
Backup Active).
• State — The state for the port.
• Blocked — The configuration of the switch (blocked or unblocked).
• Type — The port type.
• Locked Type — The port type of the locked product.
NOTE: Offline ports of a Network OS device in AG mode are
displayed as N_Port.
• Speed (Gbps) — The speed of the port.
• Buffers Desired — The number of buffers desired but not allocated.
• Buffers Allocated — The number of buffers allocated.
• Distance Actual (km) — The actual distance (in km) for -end port
connectivity.
• Distance Estimated (km) — The estimated distance (in km) for -end
port connectivity.
• Distance setting — Whether the connection is considered to be
normal or longer distance.
• Attached Switch — The IP address of the attached device.
• Attached Port # — The port number of the attached product.
• Connected Devices — The WWN for each connected device.
• NPIV Status — Whether NPIV is enabled or disabled on the port.
Field/Component Description