User's Manual

1238 Brocade Network Advisor IP User Manual
53-1003056-01
IP Wired Products report
40
Detailed Cluster Report
NOTE
This report is only available for VCS clusters.
To launch the Detailed Cluster Report from the topology, right-click the VCS cluster on the Network
Objects, L2 Topology, Ethernet Fabrics, IP Topology, or VLAN Topology view and select Detailed
Report.
The Detailed Cluster Report displays (Table 102).
AP List Count Access Point information for wireless controllers. The table title includes the number of
access points attached to the selected device. Information includes:
• Product Status — Whether the AP is online (green icon), offline (red icon), or pending
adoption (gray icon).
• Name — The device name used to identify AP.
• Connected Switch — IP address of the controller or switch connected to the AP. Also
displays the port number if the AP is directly connected.
• Controller — IP address of the controller which manages the AP. Also displays the
port number if the AP is directly connected.
• Cluster Name — The controller cluster name. Click to view the controller cluster
details.
• Controller — Cluster information for a wireless controller. Information includes:
• Cluster Name — The cluster name.
• Cluster Mode — The cluster mode of the AP. Options include Active and
Standby.
• Cluster members — The IP address of the controllers in cluster mode.
• MAC Address — The AP device MAC address.
• Model — The model of the AP.
• Profile Name — The AP profile name.
• RF Domain Name — The RF domain name set for the AP.
• Serial Number — The serial number of the AP.
• Firmware — The firmware level of the AP.
• Client count — The number of wireless clients or stations connected or associated
to the AP.
• Last scanned — The last time the APs were scanned.
TABLE 102 Detailed Cluster Report fields and components
Field/Component Description
TABLE 101 Detailed Product Report fields and components (Continued)