Manualshelf

User's Manual

ManualsBrandsBrocade Communications Systems ManualsNetwork HardwareBrocade Communications Systems Access Point IP250
1201120212031204120512061207120812091210
1150 Brocade Network Advisor IP User Manual
53-1003056-01
SNMP traps
37
FIGURE 471 SNMP Trap Forwarding dialog box
Adding a trap destination
The Add Trap Destination dialog box allows you to configure destinations for forwarding SNMP
traps.
To add a trap destination, complete the following steps.
1. Select Monitor > SNMP Setup > Trap Forwarding.
The SNMP Trap Forwarding dialog box, shown in Figure 471, displays.
2. Select the Enable trap forwarding check box.