User's Manual

Brocade Network Advisor IP User Manual 1147

53-1003056-01

SNMP traps

a. Select the event type you want to remove from the Event Category list.

All event types are listed in alphabetical order.

b. Select the event column for the event from the Event Column list.

All event columns are listed in alphabetical order.

c. Enter all or part of the event type value in the Value Contains field.

d. Click the right arrow button to move the event type to the Additional Filters - Exclude these

Events list.

e. To remove additional filters, repeat step a through step d.

8. To display events generated by an event action, select the event action from the Available

Event Action list and click the right arrow button to move it to the Selected Event Action to be

displayed list.

9. Click OK to close the Define Filter dialog box.

SNMP traps

Simple Network Management Protocol (SNMP) provides a means to monitor and control network

products and to manage configurations, statistics, performance, and security through

authentication and privacy protocols.

The Management application allows you to configure SNMP traps. The SNMP configuration tasks

are described in the following sections:

• “Adding a trap recipient to one or more switches” on page 1148

• “Removing a trap recipient from one or more switches” on page 1149

• “SNMP trap forwarding” on page 1149

• “Adding a trap destination” on page 1150

• “Adding a new trap filter” on page 1151

• “Event reception” on page 1153

• “Adding an SNMP v3 credential” on page 1155

• “Adding an SNMP v1 or v2c community string” on page 1156

• “Importing a new MIB into the Management application” on page 1156

• “Trap customization” on page 1157

• “Unregistering a registered trap” on page 1159

• “Customizing a registered trap definition” on page 1159

• “Reverting the customization of a registered trap to default” on page 1160