User's Manual

1122 Brocade Network Advisor IP User Manual
53-1003056-01
Configuration rules
36
1. Select Monitor > Policy Monitor.
The Policy Monitor dialog box displays.
2. Click Add.
The Add Monitor dialog box displays.
3. Click the Switch/Router Checks tab.
4. Select the configuration rule (either predefined rule or user-defined) you want to duplicate in
the Available Checks list or Selected Checks list.
5. Click Add > Configuration Rule.
The Add Configuration Rule dialog box displays.
6. Change the name for the rule in the Name field.
The name cannot be over 128 characters. The only special characters allowed are an
underscore (_) or space.
7. Change th e d e s c r i p t i o n for the rule in the Description field.
The description cannot be over 1024 ASCII characters.
8. To edit the configuration rule, repeat step 7 through step 15 of “Adding a configuration rule” on
page 1120.
9. Click OK on the Add Configuration Rule dialog box.
10. Click OK on the Add Monitor dialog box.
The updated policy monitor displays in the Monitors table of the Policy Monitor dialog box.
11. Click Close on the Policy Monitor dialog box.
Editing a configuration rule
You can edit your own rules to compare content against a baseline.
1. Select Monitor > Policy Monitor.
The Policy Monitor dialog box displays.
2. Click Edit.
The Edit Monitor dialog box displays.
3. Click the Switch/Router Checks tab.
4. Select the configuration rule you want to edit in the Available Checks list and click Edit.
The Edit Configuration Rule dialog box displays.
5. Change the name for the rule in the Name field.
The name cannot be over 128 characters. The only special characters allowed are an
underscore (_) or space.
6. Change the description for the rule in the Description field.
The description cannot be over 1024 ASCII characters.
7. To edit a configuration rule, repeat step 7 through step 15 of “Adding a configuration rule” on
page 1120.