User's Manual

Brocade Network Advisor IP User Manual 1107

53-1003056-01

Viewing existing policy monitors

To view existing policy monitors, complete the following steps.

1. Select Monitor > Policy Monitor (Figure 458).

The Policy Monitor dialog box displays.

FIGURE 458 Policy Monitor dialog box

2. Review the policy monitor details:

• Name — The user-defined name of the policy.

• Description — A description of the policy.

• Alert — Select to receive e-mail alerts and have the policy monitor status icon display in the

Status bar when the monitor fails or partially fails.

• Frequency — The frequency (one time, hourly, daily, weekly, or monthly) at which the policy

is scheduled.

• Next Run — The time the policy will run again.

• Last Run — The time the policy ran last.

• Result — The result of last policy monitor run. There are four possible results: Passed,

Partially Failed, Failed, and Not Applicable.

• Acknowledged — Whether the policy is acknowledged or not. Select the check box to

acknowledge the policy. Disabled when the associated Alert check box is cleared.

3. To add a policy monitor, click Add (refer to “Adding a policy monitor” on page 1108).

4. To edit the selected policy monitor, click Edit (refer to “Editing a policy monitor” on page 1115).

5. To delete the selected policy monitor, click Delete (refer to “Deleting a policy monitor” on

page 1115).

6. To run the selected policy and view the report, click Run (refer to “Running a policy monitor” on

page 1135).