User's Manual

Brocade Network Advisor IP User Manual 1021
53-1003056-01
IP sFlow configuration
33
2. Click Next.
The Interface Payload - sFlow Settings dialog box displays.
FIGURE 423 Interface Payload - sFlow Settings dialog box
3. Under Global Settings, select Enable to have the sFlow report enabled when it is deployed.
Select Disable to deploy the sFlow report as initially disabled.
4. Use the Rate Sampling selector to choose either Adaptive or Custom sampling.
If you choose Adaptive, the management server selects the sampling interval and traffic
sampling rate. The sampling rate is the ratio between the total number of incoming packets
and the number of flow samples taken at the product level. When Adaptive is chosen, the
sampling rate is based on interface speeds as shown in Table 90 on page 1021.
TABLE 90 Interface Payload
Interface Speed Sampling rate
10 Mbps 256
100 Mbps 512
1 Gbps 1024
10 Gbps 2048
100 Gbps 8192