User guide

43Fabric OS 4.4.x release notes
NSD panic in deleting timer.
Symptom: In a fabric of mixed 16
different type of switches (core-edge)
design, panic occurred either during
power cylce or reboot process using
one of the following procedure:
1. Power cycle all switches with
diagenablepost active
-Invoke diagenablepost in all
switches
-Power off all switches
wait for 10 minutes
-Power on all switches
2.Reboot all switches simultaneously
with diagenablepost active
-Invoke diagenablepost in all
switches
-Reboot all switches simultaneously
Fixed.
When creating a new hardware based
wwn group for one host, some
remaining hosts lose connectivity and
I/Os are rejected with certain storage
arrays.
Fixed.
In Web Tools the Cancel button in
Reset Allegiance dialog still performs
Reset Allegiance function.
Fixed.
When setting monitors (for
initiator/target pairs), duplicate entries
may occur.
Fixed.
When switch was zone using WWN,
with three machine configured with IP
over FC connected to the switch . When
moved one of the switch port to another
port on the blade that IP for the
machine would stop working.
Fixed.
Table 5 Closed issues for Fabric OS 4.2.2a (continued)
Fabric OS 4.2.2a Issue Status