User guide

Closed issues from previous 4.2.2a release38
When doing chassisconfig 2 on the
SAN Director 2/128, occasionally, after
CP1 was rebooted twice and after CP1
came back, HA was out of sync.
Fixed.
When doing zone propagation from one
of edge on the SAN Switch 2/32, on
core and edge, there was message
"Warning BLOOM-TRNK_SLV_DWN"
showing up. When switchshow on
that port is checked, there is no
indication on port offline.
Fixed.
wwnhsclient and wwnhserver
command info is inconsistent.
Fixed.
Running secfcsfailover script
overnight will have memory leak on the
switch.
Fixed.
When GE_PT is sent from the SAN
Switch 2/32 to the SAN Director 2/128,
the extended format header GE_PT
displays differently.
Fixed.
1. Fabric Watch does not generate a
FRU_ABSENT message after active
CP is pulled out.
2. Fabric Watch generates
FRU_ABSENT when active CP is
inserted immediately, or after a couple
of minutes.
Fixed.
Following successful firmware
download, and reboot -f, the following
error message may be seen:
"ECC Corr Err: BK1, Odd wd ln 1".
Fixed.
Ethernet port failed to send MAC
address after link negotiation.
Fixed.
Table 5 Closed issues for Fabric OS 4.2.2a (continued)
Fabric OS 4.2.2a Issue Status