User guide

Closed issues from previous 4.2.2a release36
hafailover on SAN Director 2/128
caused port blade vacant, but the status
LED on the port blade shows it is in a
good state.
Fixed.
On PID format conversion max cfgsize
limit is not enforced.
Fixed.
In a 4x16 fabric with zone db size
35K,the Zone administration window
opened from Fabric Manager does not
show the last two zone members
properly.
Fixed.
When user tries to download a config
file which has a license entry [Licenses]
to a switch which does not have a
license file /etc/fabos/license created,
this error will show up. "error creating
new license file" The operation will
succeed anyway.
Fixed.
Critical Error:Post Diag. Stopped, No
Longer Transmitting, Counter Stuck;
Blade Faulted.
Fixed.
PID change to 2, segments legacy
switches and only reports 1 out of 3
ports affected.
Fixed.
I/O failure in fabric with HP switches
running Fabric OS 3.0.2c & Fabric OS
4.2.0.
Fixed.
Help pages on some commands
reference the Core Switch 2/64 in the
example section.
Fixed.
cfgactvshow can only be executed
from the primary FCS Switch.
Fixed.
Table 5 Closed issues for Fabric OS 4.2.2a (continued)
Fabric OS 4.2.2a Issue Status